標題: [驗機設台問題] 購買Elecraft套件機器架設電台(post same time in newmember area) [打印本頁] 作者:
bx3aaq 時間: 2011-6-20 17:30 標題: 購買Elecraft套件機器架設電台(post same time in newmember area)
各位先進你好,
小弟這禮拜正準備參加二級考試,打算通過後,購買Elecraft的套件機器回來自行組裝設台,經詢問NCC的承辦人員,套件機器不易取得合法認證用來架設電台,一般都得購買完整的收發機(brand as Yaesu, ICOM, Kenwood...),不知哪位先進有這樣架設電台的經驗可以傳承
ps. Elecraft尚未release的機器KX3(All band QRP transceiver)是我設定的目標
謝謝 bv2bj 的回應,
日前看到N6KR 在 Dayton '11的簡介即深感興趣也加入了yahoo group. 在網路盛行的現在 "天涯若彼鄰" 的概念已是悉鬆平常之事. 鄙見QRP的機動性及通信的不易性,或可建立些挑戰性. 已未接觸業餘無線電超過十年,當年的考照好像是有關單位的恩惠,數年才辦一次,不像現在是做服務,隨到隨考. 重新打開當時購買的接收器材(Sangean ATS803A, AOR AR3000A)一種懷舊的感覺再度出現,而興起重新考照進級的念頭. 有關設備的選擇, I hope I can be glad to say "I build my rig by myself". I personally involved the RFIC design over ten years, and our lab have all kinds of RF instrument(VNA, VSA, SA, LA, SG, LCR meter...). I will enjoy the suffering for kit building.
謝謝
rfjungle作者:
bv2bj 時間: 2011-6-21 09:24
回同好DIY BUILD YOUR T/RECEIVER 是美事一樁,但完成要拿去驗照因無前例NCC主管單位可能會很頭痛.作者:
bx3aaq 時間: 2011-6-21 12:35
Thanks BV2BJ,
I will check NCC's member again during this Friday's examination. If we can't buy the kit and DIY the rig, I will try to buy an assembled kit machine. I am also curious about, if we can't apply a formal license for the DIY machine, how can the most QRPer in Taiwan to operate the DIY rig legally ?
Thanks BV2BJ,
I live in Hsinchu and work late mostly. It is not easy for me to reach there. It will be more convenient to ask question over the network.
According to the "國家通訊傳播委員會修正「業餘無線電機型式認證要點」規定 2007/06/21"
=====
六、申請供個人自用之業餘無線電機型式認證者，應依其資格等級，填據申請書（如附表二之二）一份，並檢附下列各項物品及文件：
送審器材一套。
使用手冊或說明書（正、影本各一份）。
技術規格資料（應包含頻率、輸出必v等技術資料）正、影本各一份。 器材來源證明文件。 資格文件：有效之業餘無線電人員執照（正、影本各一份）。
器材測試報告。（如附表三之二）
前項所附文件，申請者應予簽章，第(六)款之器材測試報告，於繳交型式認證審查費後，由本會各區監理處發給。
供個人自用之業餘無線電機係指『輸入同廠牌、同型號之業餘無線電機在二部以內』或『自製之業餘無線電機數量在五部以內』。
=====
I think the difficult part could be the red-letter-line. I also check the "器材來源證明文件", is defined as "統一發票或進口許可i證(國產機免)". It will be a chance to build a licensed radio station with DIY rig.
ps. I just got my 2nd class license today, but I have no rig in hand to apply for new statrion and call sign. I will consult to OM.
Thanks BV2BJ,
With comparison to Norcal40A and Elecraft KX1, their schematic have many parts similar. In KX1, the schematic is more solid, and only two of NE602A used. In addition, N6KR seems found partner in MCU programming, and use the DDS for precisely frequency control and display.
Thanks BV2BJ,
China's ham had built a KX1-like(clone?) machine and sold by Ten-Tec named R4030. The NE602A can be defined as an IF chip to up/down-convert baseband and IF signal with included local oscillator. It is a simple chip to design with today's technology. The vendor don't gain enough profit to sustain it and that is why it disappeared gradually. Our team had ever designed an receiver IC for the pager. It has more features than NE602A, but less expensive than it. The pager market is declined rapidly, and we apply it over the 27MHz keyboard/mouse application. It don't bring good profit, and that product is dropped eventually.
rfjungle作者:
bv2bj 時間: 2011-6-27 22:56
MORE EASY I PREFER KISS (KEEP IT SIMPLE STUPID) METHOD , QRP+DIPOLE+BACKPACK+GREEN AND GREATNATURE THAT IS WHAT I DREAM FOR.作者:
BV2FP 時間: 2011-6-30 07:24
BX2AF DIY
Taiwan Number 1 ,有圖有真相 作者:
bx3aaq 時間: 2011-7-1 23:27
Thanks BV2BJ,
WOW!! "DIY001" Is it a vacuum tube or transistor based transceiver ? Some of us may see the vacuum tube based audio amplifier, but it is not easy to see a vacuum tube based RF transceiver.
During worked in broadcast station to see the AM/FM transmitter with output power about 10KW, and they are all done with solid state amplifier now. The elder engineer still memory the vacuum tube based AM/FM amplifier - not fancy but long life.
In this forum, I see the activity introduction over 2011/5/31 about BX2AF OM
ps. Just got my class 2 station license today which issued with a Taiwan-made HT, and I will re-register with callsign BX3AAQ(阿~Q).
For the Norcal 40A, some university in USA select it as a lab project and course study material.
In follow course link, the NC40A is well studied in different stage. http://whites.sdsmt.edu/classes/ee322/
The course hand-out have a good balance in theory and experiment. For the home-brewer or qrper, it should be a good material.
就是好奇有趣好玩.
從上面連接裏的照片附製除了中下方空的ROFEING FILTER 還沒裝上其他RELAY,COIL已經出廠就安裝好了.
後面板還沒安裝天線端子....ETC.
只剩一些旋鈕還沒裝上SO同好要我是驗機的單位一定歸類為廠製機非DIY機,完成品佔比例太高.
)
